Pneumatic riveting machine

The pneumatic riveting machine produced by our factory is a new type of riveting equipment put into production in mainland China according to decades of production experience in Japan and Taiwan; This machine adopts the working principle of electrical integration to complete the riveting action of rivets, with precise positioning, simple and firm appearance, low center of gravity, strong rigidity, beautiful form, and the height of the worktable can be adjusted at will, which expands the riveting range; Low failure rate, almost no maintenance; The special forming principle makes the riveting part connection very firm, far stronger than the pressure riveting connection, and there is no need to worry about the riveting loosening after long-term use, which prolongs the service life of the product and improves the quality of the product; One-time riveting molding, the efficiency is much higher than bolt connection, and the cost of rivets is much lower than the cost of bolts, which is very helpful to reduce the cost of products. The riveting surface of the product is smooth and flat, and the first choice equipment will not destroy the quality of the coating and product quality during riveting, and reduce the cost of the product.
This machine has complete functions, according to the different design of tooling and mold, it can rivet countersunk head, semi-round head, cylindrical head, spherical cylindrical head rivet and hollow rivet, and can also concave countersunk platform, while the gas discharged during the riveting process does not contain oil stains and will not pollute the environment, so it is also suitable for working occasions of medical machinery and food machinery. The advanced circuit design can realize the automatic action of riveting, ensure the consistency of each riveting time, and improve the qualification rate of the product. When using automatic operation, the timer can be adjusted to the optimal time at will, which greatly improves the production efficiency and grasps the output of the shift, and reduces human loss.

1. THE TOTAL HEIGHT OF THE EQUIPMENT IS 1800MM, THE WEIGHT IS 360KG, AND THE THROAT DEPTH IS 250MM.

2. The drive is a 5T double-acting gas-hydraulic booster cylinder with a stroke of 60mm and an air source of 4-6KG/㎡.

3. Equipment power is 0.1-0.4KW (220V)

4. Standard counter, the downward pressure speed can be adjusted by 50-300mm/s, and the holding time can be adjusted by 0.2-3.0S

Spare consumables per device:
a.Upper mold: 3 sets
b.Lower die: 3 sets
c.Lip smacking: 2 sets
d.2 sets of four-corner sliders
e.2 sets of slider covers
f.2 sets of rivet runners
g.1 set of rivet runner switch cylinder assembly
h.2 sets of vibrating disc slide grooves